Difference between revisions of "APRS"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
m
Line 2: Line 2:
  
 
* [http://www.aprs.org/ Automatic Packet Reporting System]
 
* [http://www.aprs.org/ Automatic Packet Reporting System]
 +
 +
== Tips ==
 +
=== Dash Number after the Call Sign===
 +
Packet requires (as does the FCC) your call sign. This is the FROM part of the AX.25 protocol and is your
 +
own call sign. For a fixed station, this is enough. The dash number is an OPTIONAL Secondary Station ID
 +
(SSID) and it allows you to have and then distinguish between your multiple APRS stations. It can provide a
 +
little additional information about your station.  It is not a requirement.
 +
 +
The dash number after your call sign is the symbol you display on the map software or internet.
 +
 +
*-0 Home Station, Home Station running IGate.
 +
*-1 walking ?
 +
*-5 IGate
 +
*-7 HT
 +
*-8 is for boats, sailboats and ships
 +
*-9 is for Mobiles (aprs in your car)
 +
*-14 is for Truckers
 +
 +
=== Path ===
 +
In sparse areas where IGates are few, start with the above, however, you may change to WIDE1-1,WIDE2-
 +
2. The –1 and –2 add to indicate 3 hops.
  
 
== Related ==
 
== Related ==

Revision as of 03:12, 18 February 2024

Automatic Packet Reporting System (APRS) is an amateur radio-based system for real time tactical digital communications of information of immediate value in the local area. APRS is digital communications information channel for ham radio. As a single national channel, it gives the mobile ham a place to monitor for 10 to 30 minutes in any area, at any time to capture what is happening in ham radio in the surrounding area. Announcements, Bulletins, Messages, Alerts, Weather, and of course a map of all this activity including objects, frequencies, satellites, nets, meetings, hamfests, etc. The APRS network has grown to most countries with strong Amateur Radio populations.

Tips

Dash Number after the Call Sign

Packet requires (as does the FCC) your call sign. This is the FROM part of the AX.25 protocol and is your own call sign. For a fixed station, this is enough. The dash number is an OPTIONAL Secondary Station ID (SSID) and it allows you to have and then distinguish between your multiple APRS stations. It can provide a little additional information about your station. It is not a requirement.

The dash number after your call sign is the symbol you display on the map software or internet.

  • -0 Home Station, Home Station running IGate.
  • -1 walking ?
  • -5 IGate
  • -7 HT
  • -8 is for boats, sailboats and ships
  • -9 is for Mobiles (aprs in your car)
  • -14 is for Truckers

Path

In sparse areas where IGates are few, start with the above, however, you may change to WIDE1-1,WIDE2- 2. The –1 and –2 add to indicate 3 hops.

Related