The following lines were added (+) and removed (-):
==technical==The aluminum hubs either turn from not being tight enough or crack from being too tight. It is recommended that you use non-metallic paint and paint the fiberglass. When tuning the vertical match on the Moonraker people have reported problems achieving a good SWR. The vertical driven element on the Moonraker is highly effected by the location of the mast and the coax. The antenna places the vertical driven element too close to the mast bracket and coax. This causes them to radiate and produce reflected power that can change with the direction of the antenna.The aluminum hubs break really easy if you try to over tighten them, or if you try to pry them open just enough to fit them over the center boom. Don't expect the aluminum to be at all forgiving, they just crack and break.