The following lines were added (+) and removed (-):
=== Spool Replace and Line Issues ===From time to time, especially when cutting thick or stalky weeds, the line feeding hub may become clogged with sapor other material and the line will become jammed as a result.To resolve a jam turn off the trimmer and remove the battery.# Press the release tabs on the line spool cover and remove the cover by pulling it straight off.# Lift the spool of nylon line out of the hub and clear any broken line or cutting debris from the spool area.3In case of jams and tangled line unwrap about one foot (30cm) of line to ensure that it is undamaged. If it is OKrewind it and insert the line end through the eyelet in the spool hub. Pull the line through thehole to maintain tension while placing the spool down into the hub with the notched side exposed.# Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn afew degrees left and right freely.)# Snap the spool cover back on, insert the battery and turn the tool on. In a few seconds or less you’ll hear the nylonline being cut automatically to the proper length.