Black & Decker 18-Volt Cordless Grasshog Trimmer/Edger

This is a battery operated lawn trimming tool. It is for light duty lawn trimming.

Model No.: NST2018

Promotional Description

The Black & Decker 18 volt Cordless String Trimmer NST2018 is an efficient grass trimming machine that combines two tools and lets you add finishing touches to your lawn or garden. This electric grass trimmer is easy to use as it has a lightweight design and does not require any extension cords or gas for maintenance. You can use the edger function to create borders to your pathways and flowerbeds. The trimmer function in this electric grass trimmer can be used to clip grasses around plants and in tight corners. The auxiliary handle is adjustable and makes it convenient to use the machine. It is an energy efficient cordless string trimmer and is Energy Star Certified as well. It works on 2 – 18 volt NiCad battery packs, which provides with an extra run-time for better trimming. Black & Decker 18 Volt Cordless String Trimmer NST2018:

• Trimming areas after mowing on most 1/3 acre home sites
• 2-18 Volt NiCad battery packs provide extra run-time for more trimming
• Lightweight design makes it easy to use
• AFS system uses centrifugal force to automatically advance line when needed
• 12" cut path cuts more area per charge than any other cordless trimmer
• Groom 'N' Edge converts from trimming to edging with the touch of one button
• Cordless electric trimmer provides hassle free trigger starting
• Adjustable auxiliary handle adjusts to user's height
• Telescoping shaft adjusts for perfect length
• Energy Star certified - Energy-efficient and offers savings on energy bills without sacrificing performance, features, or comfort

Instructions

Charging the Battery

• Use only the supplied charger when charging your unit. The use of any other charger could

damage the battery or create a hazardous condition. see AC_DC_Adapter_Reference#Black_and_Decker_FS18C_Class_2_Battery_Charger

The charger is designed to use standard household 120 volt 60 Hz power. After normal usage, your power pack should be fully charged in 3 to 6 hours. If the power pack is run-down completely, it may take up to 6 hours to become fully charged.

1. Plug the charger into any standard 120 Volt 60 Hz electrical outlet. NOTE: Do not charge by means of an engine generator or DC power source. Use only 120V AC.

2. Slide the charger onto the power pack and let the power pack charge initially for 9 hours. After the initial charge, under normal usage, your power pack should be fully charged in 3 to 6 hours.

3. Unplug charger, and remove the power pack. Place the power pack in the unit and be certain that it is inserted fully into the battery cavity until it “clicks” into place.

The charger and battery pack can be left connected with the red light glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

NOTE: A battery pack will slowly lose its charge when kept out of the charger. If the battery pack has not been kept on maintenance charge, it may need to be recharged before use. A battery pack may also slowly lose its charge if left in a charger that is not plugged into an appropriate AC source.

Operation

To turn trimmer on, pull the lock out button back and, then squeeze the trigger switch. To turn the tool off, release the trigger. Slowly swing trimmer side-to-side

To convert for maintenance edging, turn off the tool. Holding the trimmer with one hand by the auxiliary handle, grasp the collar and push in direction of arrow and rotate the trimmer head until it stops, (half turn), release your hand, (rotate clockwise when viewed from the switch end). The tool is locked in the edger position. Rotate the wire edge guide forward and down into place before edging.

Return to trimming position by turning the tool off, push in direction of arrow and rotating the trimmer head counter clockwise until it stops. When using the tool in the trimmer mode you may choose to fold the wire edge guide up out of the way.

Line Feed

Your trimmer uses .065” (1.65mm) diameter nylon line to cut grass and weeds quickly and easily. In time, the tip of the nylon line will become worn and the auto feed mechanism will automatically feed and trim a fresh length of line. The cutting line will wear faster if the cutting is done along sidewalks or other abrasive surfaces or heavier weeds are being cut. The automatic feed mechanism senses when more cutting line is needed and feeds and trims the correct length of line whenever it is required. You don’t even have to think about it. Do not bump unit on ground in attempt to feed line or for any other purpose.

Spool Replace and Line Issues

From time to time, especially when cutting thick or stalky weeds, the line feeding hub may become clogged with sap or other material and the line will become jammed as a result.

To resolve a jam turn off the trimmer and remove the battery.

1. Press the release tabs on the line spool cover and remove the cover by pulling it straight off.
2. Lift the spool of nylon line out of the hub and clear any broken line or cutting debris from the spool area.

3In case of jams and tangled line unwrap about one foot (30cm) of line to ensure that it is undamaged. If it is OK rewind it and insert the line end through the eyelet in the spool hub. Pull the line through the hole to maintain tension while placing the spool down into the hub with the notched side exposed.

1. Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn a

few degrees left and right freely.)

1. Snap the spool cover back on, insert the battery and turn the tool on. In a few seconds or less you’ll hear the nylon

line being cut automatically to the proper length.

Bulk line for your trimmer/edger is available at extra cost from your local dealer or Black & Decker Service Center. To install bulk line, turn off the trimmer and remove the battery.

1. Press the release tabs on the line spool cover, and remove the cover by pulling it straight off.
2. Remove the spool from the tool and remove and discard all line on the spool.
3. Insert one end of the bulk line into the hole in the spool about 1/2” (12mm).
4. Hold the line in the hole and pull the rest of the line through the slot in the spool.
5. Snugly and evenly wind the bulk line onto the spool in the direction of the arrow on spool until it is nearly full. (The spool holds 50 ft. (15.2m) of line and bulk line is sold in 50 foot sections.)
6. Insert the line end through the eyelet in the spool hub. Pull the line through the hole to maintain tension while placing the spool down into the hub with the notched side exposed.
7. Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn a few degrees left and right freely.)
8. Snap the spool cover back on, insert the battery and turn the tool on. In a few seconds or less you’ll hear the nylon line being cut automatically to the proper length.

== Parts and Service

Black and Decker NST2018 Type 1 18 Volt 12" Cordless GRASSHOG Trimmer / Edger Parts