The following lines were added (+) and removed (-):
# Snugly and evenly wind the bulk line onto the spool in the direction of the arrow on spool until it is# Snugly and evenly wind the bulk line onto the spool in the direction of the arrow on spool until it is nearly full. (The spool holds 50 ft. (15.2m) of line and bulk line is sold in 50 foot sections.)nearly full. (The spool holds 50 ft. (15.2m) of line and bulk line is sold in 50 foot sections.)# Insert the line end through the eyelet in the spool hub. Pull the line through the hole to maintain tension while placing the spool down into the hub with the notched side exposed.# Insert the line end through the eyelet in the spool hub. Pull the line through the hole to# Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn a few degrees left and right freely.)maintain tension while placing the spool down into the hub with the notched side exposed.# Snap the spool cover back on, insert the battery and turn the tool on. In a few seconds or less you’ll hear the nylon line being cut automatically to the proper length.# Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn a few degrees left and right freely.)[[File:blackdeckerinstalline.png]]# Snap the spool cover back on, insert the battery and turn the tool on. In a few seconds or less you’ll hear the nylonline being cut automatically to the proper length.