Difference between revisions of "HP LaserJet 3055"
m (→Support and Driver) |
m (→Support and Driver) |
||
| Line 35: | Line 35: | ||
Manufacturer Part Number: Q2612A | Manufacturer Part Number: Q2612A | ||
| − | == | + | == Troubleshooting == |
| − | === Microsoft Windows XP === | + | === Microsoft Windows XP Driver === |
* [http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140780&prodTypeId=18972&prodSeriesId=1161389&swLang=8&taskId=135&swEnvOID=228 Print Drivers] | * [http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140780&prodTypeId=18972&prodSeriesId=1161389&swLang=8&taskId=135&swEnvOID=228 Print Drivers] | ||
| Line 53: | Line 53: | ||
*Let the printer do its thing. | *Let the printer do its thing. | ||
*Reboot | *Reboot | ||
| + | |||
| + | === Scanner Error 6 Turn off then on === | ||
| + | |||
| + | 1. Try this first, it is a NVRAM INITZ reset procedure. [http://forums13.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=109447627+1260597896708+28353475&threadId=1211552 REF] | ||
| + | *switch off the printer, then remove all cables connecting to the printer but just the power cable. | ||
| + | *then press and hold the *(start/symoble) and 5 button togather and turn on the printer. | ||
| + | *continue holding the button till you see "perment storage init" displayed and releas the button. | ||
| + | *then at a given point of time the printer will ask you to change laguage,time,date etc. | ||
| + | |||
| + | 2. Remove paper scrap or dust obstructing scanner or sensor. [http://forums13.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=109447627+1260597475214+28353475&threadId=1219841 REF] | ||
| + | |||
| + | 3. Clean sensor. [http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1260597468270+28353475&threadId=1263658 REF] | ||
| + | *turn off power | ||
| + | *remove ADF and inspect blew out any dust | ||
| + | *unclipped control panel cover and removed top platen cover 4 torx screws | ||
| + | *inspected and dusted (blew out) the scanner | ||
| + | *put platen cover back again and placed 5 sheets new paper over right side (where scanner is) and turned on came up happy | ||
| + | *turned off reinstalled ADF (cleaned the white surface first) turned on again | ||
| + | |||
| | ||
Revision as of 00:44, 12 December 2009
Hewlett-Packard aserJet 3055 All-in-One
Versatility in a compact, flatbed design
- • A reliable printer, fax, scanner and copier—all in one machine
- • Enjoy simple office integration.
- • Share the All-in-One convenience.
Professionally print, copy, fax, and scan
- • Expect fast, high-quality output.
- • Work confidently—this product won’t hold you up.
- • Send and receive faxes with ease.
- • 33.6 kbps faxing (v 34, Super G3), with two RJ-11 ports
A simpler, smarter way to work
- • Reduce user intervention.
- • Maximize office efficiency.
- • Print professional documents with genuine HP print cartridges.
- • Depend on effortless interactions
Contents
HP LaserJet 3055 Toner Cartridge
Genuine HP LaserJet Ultraprecise Print Cartridge - Estimated Yield 2,000 @ 5% - Genuine HP Cartridge.
For Use In: HP LaserJet 1010, HP LaserJet 1012, HP LaserJet 1015, HP LaserJet 1018, HP LaserJet 1020, HP LaserJet 1022, HP LaserJet 1022N, HP LaserJet 1022NW, HP LaserJet 3015, HP LaserJet 3020, HP LaserJet 3030, HP LaserJet 3050, HP LaserJet 3052, HP LaserJet 3055, HP LaserJet M1005
Mfr Part #: Q2612A, 12A
The HP Q2612A Black Toner Cartridge has a page yield of 2,000 Pages @ 5% Coverage.
Mwave Part Number: 3357009
Manufacturer Part Number: Q2612A
Troubleshooting
Microsoft Windows XP Driver
HP ToolboxFX has encountered an error...
When Windows XP loads the following error message appears: HP ToolboxFX has encountered an error and can not recover. Please re-start your PC.
Try this:
- Press the "Menu" button on the 3055.
- Press the "#" and "*" at the same time.
- Scroll to the right until you see "REINIT FFS"
- Press "Enter"
- Let the printer do its thing.
- Reboot
Scanner Error 6 Turn off then on
1. Try this first, it is a NVRAM INITZ reset procedure. REF
- switch off the printer, then remove all cables connecting to the printer but just the power cable.
- then press and hold the *(start/symoble) and 5 button togather and turn on the printer.
- continue holding the button till you see "perment storage init" displayed and releas the button.
- then at a given point of time the printer will ask you to change laguage,time,date etc.
2. Remove paper scrap or dust obstructing scanner or sensor. REF
3. Clean sensor. REF
- turn off power
- remove ADF and inspect blew out any dust
- unclipped control panel cover and removed top platen cover 4 torx screws
- inspected and dusted (blew out) the scanner
- put platen cover back again and placed 5 sheets new paper over right side (where scanner is) and turned on came up happy
- turned off reinstalled ADF (cleaned the white surface first) turned on again
