The following lines were added (+) and removed (-):
[[File:tk88o-h.jpg]]You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. The KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other. The program for V2 is Windows based, instead of DOS based, like in V1.You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. The last released KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other. Re-align the radio for optimum performance on 70cm.===software===K-880 use software KPG-49D. The KPG-49D Version 2.(any number) and 3.(any number) are DOS based, while version 4.(any number) are Windows based and much easier to use. For a programming cable use KPG-46.* Recommended Software: <big>'''KPG-49D Version 4'''</big>For the European version of the K-880 you will instead use the KPG-60D DOS software with the same KPG-46 cable.===kenwood programming software reference for the TK-880===* TK-880-V1-Only - E4B3 Use only in Version 1 Radios CURRENT* TK-880-V2-Only - 411XXXXX E613 Corrects no mic PTT after TX via COM1 203.85 KB CURRENT* TK-880-V2-Only - 410XXXXX 8C84 Corrects busy ch. lockout on conventional data channels 203.56 KB* TK-880-V2-Only - 310xxxxx 2523 Corrects cannot decode MSK PTT ID when product is first turned on 202.95 KB* TK-880-V2-Only - 306XXXXX 541D Allows PTT after attempting PTT while receiving an LTR Fleetsync PTT ID 202.13 KB* TK-880-V2-Only - 302XXXXX 697B Corrects lock-up when GPS receiver sends a comma when set for $PRMC 201.97 KB==resources==Yahoo Group for ..[https://groups.yahoo.com/neo/groups/Kenwwod_TK880/conversations/messages?messageStartId=95&archiveSearch=true Kenwood TK-880 UHF-FM - Yahoo Groups]