The following lines were added (+) and removed (-):
You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. The KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other. You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. The KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other. The program for V2 is Windows based, instead of DOS based, like in V1.The TK-880 will program below 450 MHz, but the receive sensitivity is reduced. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum.The TK-880 will program below 450 MHz, but the receive sensitivity is reduced. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum. It is said that most Kenwood [[LMRS]] 450-490 radios will go to about 442-443 mhz, but the VCO can easily be adjusted to go lower.