Difference between revisions of "Kenwood TM-241A"
From Free Knowledge Base- The DUCK Project: information for everyone
m (→Programming) |
|||
| Line 10: | Line 10: | ||
== Programming == | == Programming == | ||
| − | # Press the | + | # Press the [VFO] key to select the VFO operating mode |
# Select the frequency, tone, offset | # Select the frequency, tone, offset | ||
| − | # Press the F key. The F indicator and a channel memory number will be displayed. | + | # Press the [F] key. The [F] indicator and a channel memory number will be displayed. |
# Select the memory channel to store the frequency in. | # Select the memory channel to store the frequency in. | ||
| − | # Press the MR/M button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful. | + | # Press the [MR/M] button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful. |
Revision as of 22:58, 1 April 2017
VFO Control
Select CTCSS Tone
- Long-press the F key. The F indicator will flash.
- Press the TONE/T.ALT button
- Turn dial to select PL tone.
- Once correct tone selected, short-press F key to accept.
Programming
- Press the [VFO] key to select the VFO operating mode
- Select the frequency, tone, offset
- Press the [F] key. The [F] indicator and a channel memory number will be displayed.
- Select the memory channel to store the frequency in.
- Press the [MR/M] button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful.
