The following lines were added (+) and removed (-):
The buttons on the top of the radio are as follows: [ F ] [V/M] [REV] [ 0 ] function vfo or mem reverse power on/offThe buttons on the front face below the LCD are dual function [CALL] [MHz ] [MONI] or or or [F] + TONE XMIT POWER SQUELCH* Press [F] and [CALL]. The secondary function is TONE. Repeat to toggle through transmit tone, receive tone squelch, and DCS. Land on the one you want to set, once set, press [VM] to save.* Press [F] and [CALL]. The secondary function is TONE. Repeat to toggle through transmit tone, receive tone squelch, and DCS. Use the big dial to set tone, you cannot enter with pad. Land on the one you want to set, once set, press [VM] to save.SAVE TO CHANNEL MEMORY* Press [F] and turn dial to empty channel number, then press [VM] to save to that location. If the channel is empty the number will blink with no symbol below it, if the channel is occupied a black arrow will appear below the flashing number.* Unlike some radios, you WILL SAVE OVER a channel memory that is occupied.DELETE CHANNEL MEMORY* In channel mode turn dial to select channel to delete and press [F], release, and press [REV]. You will be prompted with "SURE?" you then press [REV] again to erase channel memory for that one channel.[[Category:Electronics]][[Category:Radio]][[Category:Ham Radio]][[Category:2-Way Radio]][[Category:Tangible Product]]