Difference between revisions of "Update Rogero PS3 Custom Firmware"
(Created page with "Rogero (pseudonym) is a well known Playstation 3 (PS3) developer that offers, free of charge, a CFW (Custom Firmware) having the same name. The Regero firmware is used on the...") |
|||
| Line 8: | Line 8: | ||
This guide covers, specifically, the process of upgrading a PS3 that has already jailbreak applied, and is using the Rogero custom firmware. The guide can also be followed for the purpose of applying jailbreak to a PS3 that still has official factory firmware 3.55 or older. Although the example in this guide demonstrates updating Rogero version 4.31 to Rogero 4.46, it can be generally applied to updating the Rogero of nearly any version to the latest release. | This guide covers, specifically, the process of upgrading a PS3 that has already jailbreak applied, and is using the Rogero custom firmware. The guide can also be followed for the purpose of applying jailbreak to a PS3 that still has official factory firmware 3.55 or older. Although the example in this guide demonstrates updating Rogero version 4.31 to Rogero 4.46, it can be generally applied to updating the Rogero of nearly any version to the latest release. | ||
| + | |||
| + | == Update Rogero 4.31 to Rogero 4.46 == | ||
| + | |||
| + | Rogero version 4.31 is actually 4.30 v 2.05. Before you begin, you will need a USB Flash drive with sufficient space, (512MB or larger), a PC, and the file Rogero_Multiman_4.5_CEX.zip which you will have to procure yourself. The custom firmware is not provided here. Be careful, there are fakes out there that will brick your PS3. Furthermore, if the download is corrupted you will also be in trouble. You need to verify the contents by the MD5 checksum. | ||
| + | |||
| + | Follow these steps that have been verified to work. | ||
| + | |||
| + | # Obtain the file 'Rogero_Multiman_4.5_CEX.zip' | ||
| + | # Obtain a USB flash drive and insert it into a PC. Format the flash drive FAT32. | ||
| + | # Create folders on the flash drive, first folder named PS3 and within that a folder named UPDATE. ( \PS3\UPDATE ). | ||
| + | # Open the 'Rogero_Multiman_4.5_CEX.zip' and extract the contents, including the most critical PUP file | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | which should have an MD5 checksum of '3F94515E1B6E3C0CE546A30F229EEFF6'. Verify your file by comparing the checksum to this one. | ||
Revision as of 14:58, 20 August 2014
Rogero (pseudonym) is a well known Playstation 3 (PS3) developer that offers, free of charge, a CFW (Custom Firmware) having the same name. The Regero firmware is used on the PS3 after jailbreak.
To jailbreak the PS3 is a process by which a system bug is exploited allowing a level of access to the subsystem which makes it possible to replace the authorized factory firmware with a customized firmware created by the hacker community. Advantages to running a custom firmware amount to increased capability, backup ability, and control over the system beyond what Sony would otherwise allow. One particular benefit is the ability to install an entire game from the Bluray so that disc insertion is no longer required to play a game. This way those precious and expensive game discs can be stored away safely, preventing scratches and damage, while all your games are accessible directly from the system drive or an attached USB storage device.
It is very easy to jailbreak your PlayStation if you have not used the system update to update your PlayStation to a version higher than OFW 3.55. You do not need to buy any special devices to jailbreak your PlayStation, or pay for any special software. Everything you need is free to download. You will need a USB Flash Drive and a PC.
If you have a PlayStation with a firmware version newer/higher than 3.55 it is still possible to jailbreak it, but it is a lot more involved and does require the purchase of hardware.
This guide covers, specifically, the process of upgrading a PS3 that has already jailbreak applied, and is using the Rogero custom firmware. The guide can also be followed for the purpose of applying jailbreak to a PS3 that still has official factory firmware 3.55 or older. Although the example in this guide demonstrates updating Rogero version 4.31 to Rogero 4.46, it can be generally applied to updating the Rogero of nearly any version to the latest release.
Update Rogero 4.31 to Rogero 4.46
Rogero version 4.31 is actually 4.30 v 2.05. Before you begin, you will need a USB Flash drive with sufficient space, (512MB or larger), a PC, and the file Rogero_Multiman_4.5_CEX.zip which you will have to procure yourself. The custom firmware is not provided here. Be careful, there are fakes out there that will brick your PS3. Furthermore, if the download is corrupted you will also be in trouble. You need to verify the contents by the MD5 checksum.
Follow these steps that have been verified to work.
- Obtain the file 'Rogero_Multiman_4.5_CEX.zip'
- Obtain a USB flash drive and insert it into a PC. Format the flash drive FAT32.
- Create folders on the flash drive, first folder named PS3 and within that a folder named UPDATE. ( \PS3\UPDATE ).
- Open the 'Rogero_Multiman_4.5_CEX.zip' and extract the contents, including the most critical PUP file
which should have an MD5 checksum of '3F94515E1B6E3C0CE546A30F229EEFF6'. Verify your file by comparing the checksum to this one.
