Difference between revisions of "Yaesu FT-817"
(Created page with "The FT-817 is a compact, innovative multiband, multimode portable transceiver for the amateur radio HF/VHF/UHF bands. Providing coverage of the 160-10 meter bands plus the 6 m...") |
|||
| Line 13: | Line 13: | ||
down by one frequency band. | down by one frequency band. | ||
| + | Mode Keys: Pressing either of these keys momentarily will change the Operating mode. | ||
| + | Home Key: Pressing this key momentarily recalls a favorite "HOME" frequency memory. | ||
| + | Clar Key: | ||
| + | |||
| + | Ant Jack: | ||
| + | |||
| + | ==Memory Channels== | ||
| + | Normal Memory Storage | ||
| + | |||
| + | 1. Tune in the desired frequency, and set the operating mode and bandwidth. If this is an | ||
| + | FM channel, set up any required CTCSS/DCS and repeater shift configurations. Standard (default) repeater shifts do not require you to utilize the "split" frequency memory | ||
| + | technique. | ||
| + | |||
| + | 2. Press the [F] key momentarily, then rotate the [SEL] knob as needed until Operating | ||
| + | Function Row 2 [ MW, MC, TAG ] appears on the display. | ||
| + | |||
| + | 3. Press the [A] key momentarily to enter the "Memory Check" mode, which is used to find an unused memory channel. The frequency stored (if any) on the current memory channel will be shown in the display. | ||
| + | |||
| + | 4. Rotate the [SEL] knob to select the channel number on which you wish to store the current frequency data. | ||
| + | |||
| + | 5. Press and hold in the [A](MW) for one second until you hear a double beep; the second beep confirms that the frequency information was successfully stored. | ||
Revision as of 19:38, 2 November 2017
The FT-817 is a compact, innovative multiband, multimode portable transceiver for the amateur radio HF/VHF/UHF bands. Providing coverage of the 160-10 meter bands plus the 6 m, 2 m, and 70 cm bands, the FT-817 includes operation on the SSB, CW, AM, FM, and Digital modes, yielding the most comprehensive performance package available for portable operation.
Designed for use either from an external DC power source or internal batteries, the FT-817 provides five watts of power output from a 13.8-Volt external power supply.
Front Panel Control
FUNC Keys: These three keys select many of the most important operating features of the transceiver. When pressing the [F] key, the current function of that key appears above each of the [A], [B], [C] keys (along the bottom of the LCD); rotating the [SEL] knob scrolls the display through eleven rows of functions available for use via the [A], [B], [C] keys.
Band Down/Up Keys: Pressing either of these keys momentarily will cause the frequency to be moved up or down by one frequency band.
Mode Keys: Pressing either of these keys momentarily will change the Operating mode.
Home Key: Pressing this key momentarily recalls a favorite "HOME" frequency memory.
Clar Key:
Ant Jack:
Memory Channels
Normal Memory Storage
1. Tune in the desired frequency, and set the operating mode and bandwidth. If this is an FM channel, set up any required CTCSS/DCS and repeater shift configurations. Standard (default) repeater shifts do not require you to utilize the "split" frequency memory technique.
2. Press the [F] key momentarily, then rotate the [SEL] knob as needed until Operating Function Row 2 [ MW, MC, TAG ] appears on the display.
3. Press the [A] key momentarily to enter the "Memory Check" mode, which is used to find an unused memory channel. The frequency stored (if any) on the current memory channel will be shown in the display.
4. Rotate the [SEL] knob to select the channel number on which you wish to store the current frequency data.
5. Press and hold in the [A](MW) for one second until you hear a double beep; the second beep confirms that the frequency information was successfully stored.
