Difference between revisions of "Pofung BF-9500"
From Free Knowledge Base- The DUCK Project: information for everyone
(→basic use) |
(→basic use) |
||
| Line 45: | Line 45: | ||
* Frequency: Press and hold down [MHZ] and turn dial to set the offset. press [VM] to save. | * Frequency: Press and hold down [MHZ] and turn dial to set the offset. press [VM] to save. | ||
* +/-/none: This is tricky and doesn't work the way the manual describes. You press hold down [MHZ] until it beeps and shows the offset frequency, then you press and hold down [MHZ] again for another long press until it beeps. Each additional long press will toggle between + - or none, however, nothing on the display indicates the current mode. You have to use trial and error. Just toggle the state once and save by pressing [VM] then test to see what state you ended up with. Rinse and repeat until you have the offset or lack of offset you desire. | * +/-/none: This is tricky and doesn't work the way the manual describes. You press hold down [MHZ] until it beeps and shows the offset frequency, then you press and hold down [MHZ] again for another long press until it beeps. Each additional long press will toggle between + - or none, however, nothing on the display indicates the current mode. You have to use trial and error. Just toggle the state once and save by pressing [VM] then test to see what state you ended up with. Rinse and repeat until you have the offset or lack of offset you desire. | ||
| + | |||
| + | SAVE TO CHANNEL MEMORY | ||
| + | * Press [F] and turn dial to empty channel number, then press [VM] to save to that location. | ||
Revision as of 18:30, 2 June 2016
BaoFeng / Pofung BF-9500 UHF 400-470MHz 45W/25W/10W Mobile Transceiver
You can use one of five tones to send a message, and other features include an emergency alarm, call all ani, remote kill, remote waken, and more. It has a 200 channel memory. Set power to High/medium/low for a variety of communication distances. The big LCD display has adjustable brightness and color.
Two main configuration options: Business Professional Use or Amateur Radio Use
SPECIFICATION
- Frequency: UHF400-470MHz
- Channel: 200
- Channel spacing: 12.5/20/25kHz
- Frequency step: 2.5/5/6.25/8.33/10/12.5/25/50/100kHz
- Working Voltage: 13.8V ±15%
- Squelch style: CTCSS/DCS/5Tone/2Tone/DTMF
- Frequency Stability: ±2.5ppm
- Operating temperature: -20 °C to +60°C
- Dimension: 145x47x190mm
TRANSMISSION
- Sensitivity(12dB SINAD): <=0.25μV/<=0.35μV
- Adjacent channel selectivity: >=70/>=60dB
- Inter modulation: >=65dB/>=60dB
- Spurious Rejection: >=70dB
- Acoustic frequency response: + 1- -3dB(0.3-2.55k)
- SNR: >=45dB/>=40dB
- Audio distortion: <=5%
- Audio Output Power: >2W@10%
basic use
VFO or Channel operation
- Press [V/M] on top of radio
Select Amateur or Professional mode
- Press [REV] and the power button at the same time when radio is off. Release the power button but continue to hold down the [REV] button until the new mode is set.
Change the transmit output power (toggles Low, Medium, and High)
- Press [F] and [MHZ] to toggle. The secondary function of [MHZ] is POWER. L or M is indicated on the display. When no letter presence the power is high.
SET CTCSS / PL Tone
- Press [F] and [CALL]. The secondary function is TONE. Repeat to toggle through transmit tone, receive tone squelch, and DCS. Land on the one you want to set, once set, press [VM] to save.
REPEATER OFFSET
- Frequency: Press and hold down [MHZ] and turn dial to set the offset. press [VM] to save.
- +/-/none: This is tricky and doesn't work the way the manual describes. You press hold down [MHZ] until it beeps and shows the offset frequency, then you press and hold down [MHZ] again for another long press until it beeps. Each additional long press will toggle between + - or none, however, nothing on the display indicates the current mode. You have to use trial and error. Just toggle the state once and save by pressing [VM] then test to see what state you ended up with. Rinse and repeat until you have the offset or lack of offset you desire.
SAVE TO CHANNEL MEMORY
- Press [F] and turn dial to empty channel number, then press [VM] to save to that location.
