Difference between revisions of "Olegs Firmware on Asus WL-500gP"
From Free Knowledge Base- The DUCK Project: information for everyone
(New page: since firmware 1.7.5.9-2 : :::(works with firmware is 1.9.2.7-7g) VIA WEB INTERFACE :- set the router SSID to SSID of the AP you wish to connect to :- set LAN interface parameters and wor...) |
(No difference)
|
Revision as of 02:36, 12 January 2008
since firmware 1.7.5.9-2 :
- (works with firmware is 1.9.2.7-7g)
VIA WEB INTERFACE
- - set the router SSID to SSID of the AP you wish to connect to
- - set LAN interface parameters and workstation
- - set WAN interface to parameters of wireless network from AP because in
- Wireless, Advanced, set Extended mode to "station" so wl scan would work client mode the WAN and WLAN functions are exchanged.
VIA TELNET
- - nvram set 13_x_ClientMode=1 (0=ap, 1=sta, 2=wet)
- - nvram commit
- - reboot
Use "wl assoc" to check the connection status.
nvram set 13_x_ClientMode=1 nvram commit
You can scan for networks and view the results with the following
wl scan; sleep 2s; wl scanresults