Cobra MicroTALK PR245 2-Way Radio
The Cobra PR-245 supports 22 FRS/GMRS channels and 38 privacy codes. The manufacturer claims that the PR-245 has a maximum range of up to 6 miles. As with any FRS walkie talkie, the 6 mile range claim would be under ideal conditions with no obstructions line of sight. The radio supports channel scan and allows you to choose from 5 different call tones. Each PR-245 two way radio requires 4 AAA batteries.
Contents
Guide
Battery
When battery power is low, the Battery Low icon will blink. Your batteries should be replaced.
Your microTALK is designed to extend battery life. If there are no transmissions within ten (10) seconds, the radio will automatically switch to Battery Save mode and the Power Saver icon will flash in the display. This will not affect the radio's ability to receive incoming transmissions.
Channels
With the radio On, select any of the 22 channels by pressing the Channel Up or Channel Down button. Channels 1 through 7 are shared with FRS/GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.
Volume
To Adjust The Volume:
- Press the Volume Up or Volume Down button. A double beep sound is used to indicate the minimum and maximum volume levels (1 through 8).
Auto Squelch
The radio uses automatic squelch. Auto squelch automatically shuts Off weak transmissions and unwanted noise due to terrain, conditions, or if you've reached your Maximum range limit.
You can temporarily turn Off auto squelch or turn On maximum range extender, allowing all signals to be received and extending the maximum range of your radio.
To Temporarily Turn Off Auto Squelch:
- Press the Light/Max Range button for less than (5) seconds. If you hear two (2) beeps, you have turned the maximum range extender On.
To Turn Maximum Range Extender Off and enable Auto Squelch:
- Press and release the Light/Max Range button or change channels.
If you press and release the Light/Max button it will also illuminate the display for 10 seconds.
Lock Function
The Lock function locks the Channel Up, Channel Down, and Mode/Power buttons to prevent accidental operation.
To Turn The Lock On Or Off:
- Press and hold the Lock button for (2) seconds. You will hear two beeps to confirm.
The lock icon will be displayed when lock is on. To disable lock repeat the same procedure