Difference between revisions of "1.25 Meter Ham Radio Transceivers"
(→Yaesu FT-736R) |
|||
| Line 80: | Line 80: | ||
===Yaesu FT-736R=== | ===Yaesu FT-736R=== | ||
| + | |||
| + | All Mode. Requires modules for each band. The 220 module FEX-736-220 allows this transceiver to operate SSB, CW and FM. With modules 50, 144, 220, 430, 440 and 1200 MHz amateur bands are possible. Comes with 2 meters and 440. Output 25 watts on 220 with module. 100 channel memory. | ||
| + | |||
| + | Used Value: $450 - $800 | ||
===Drake UV-3=== | ===Drake UV-3=== | ||
Revision as of 23:36, 2 August 2016
This is a loosely constructed list of past and current 1.25m 220 222 amateur radio transceivers (work in progress).
CURRENT PRODUCTION (mobile)
Anytone AT 588
Jetstream JT220M
TYT TH-9000D
TYT TH9000D 222Mhz does ctcss/dcs/scan/dtmf with 200 channels. There are five user programmable front function keys. Coverage is from 220 - 260MHz with transmit power levels VHF: 10W/25W/60W.
TYT TH-9800 PLUS
This is a special model of the TYT TH-9800 which substitutes 440 coverage for 220 coverage.
OUT OF PRODUCTION (mobile)
Alinco DR-235T
FM only. 25 Watt 100 memory Channel radio for 222 MHz. Transmit range is 222-224.995 MHz. Three power outputs (25/10/5 watts). Built in PL/CTCSS. Receive range is 216.000 - 279.995 MHz.
Azden PCS-7200
222-225MHz FM mobile transceiver
Clegg FM-76
FM Only. Clegg FM-76 220 MHz, 10 Watt. Crystal radio. 12 transmit channels each requires crystals.
Used Value: $70
Icom IC-37A
Power output may be selected at 25 or 5 watts. Operation is from 220-225 MHz. The speaker is built-in. This radio requires 6.5 amps. It has 9 memories. This particular radio was prone to the squelch potentiometer going bad and having a low deviation, both issues are correctable. Built in PL tone.
Icom IC-38A
220MHz FM Mobile Transceiver. Frequency Coverage: Tx: 220-225 MHz, Rx: 215-230 MHz. 21 Channel memory. Output power: High: 25 W Low: 5 W. PL/CTCSS built in.
Kenwood TM-3530A
FM, Manufactured in the 1980s. Solid State.
The Kenwood TM-3530A transmits 25 or 5 watts on 220 MHz, is 7.1 x 2.4 x 7.7 inches and weighs 4 lbs. It is 23 channel memories, Auto Repeater Offset, DTMF, and repeater offset. The display is LCD. It has built in PL/CTCSS encode, you can selct from the display.
Used Value: $300.000
Kenwood TM-621A
Kenwood TM-631A
Midland 13-509 / Cobra 200
FM only. Fixed frequency crystals for both receiving and transmitting. Power out is either 1w or 10w.
Used value: $70
Midland 13-513
Ten-Tech 1230
FM only. Kit form. Has a big front panel knob for tuning of 220Mhz MHz in 5Khz or 2.5 Khz steps. 15 memories. Included PL/CTCSS tone. 20-watts out. Highly collectible.
Used Value: $350
OUT OF PRODUCTION (station)
Icom IC-375A
Multimode. Solid State. Highly sought after
Similar in design and operation to the IC-275 and IC-475. The Icom IC-375A has an amber LCD display showing frequency, VFO_t memory channel, RIT, tone squelch, duplex offset, and mode. Modes of operation: The 375 has four modes: FM. LSB, USB and CW. (No AM) optional CW filter (500 Hz). PL/CTCSS frequencies on both receive and transmit. 99 seperate memory channels. RIT (Receiver Incremental Tuning) is standard and permits a shift of up to 9.9 kHz either side of the displayed frequency. Additonal controls: RF output power, RF gain, CW keying delay, meter display, and AF tone quality from the built-in speaker.
Used value: $1200
Yaesu FT-736R
All Mode. Requires modules for each band. The 220 module FEX-736-220 allows this transceiver to operate SSB, CW and FM. With modules 50, 144, 220, 430, 440 and 1200 MHz amateur bands are possible. Comes with 2 meters and 440. Output 25 watts on 220 with module. 100 channel memory.
Used Value: $450 - $800
