Difference between revisions of "Kenwood TK-880H"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "This is an FCC Title 47 Part 90 certified transceiver. * Band: 450-490 Mhz * 32 systems / 250 groups (trunked mode) * Max 600 channels (trunked mode) * Max 250 channels cap...") |
|||
| Line 1: | Line 1: | ||
| − | This is an FCC Title 47 Part 90 certified transceiver. | + | This is an FCC Title 47 Part 90 certified transceiver. This is a business band radio that is possible to program for use on 70cm ham radio. |
| − | * Band: 450-490 Mhz | + | *Band: 450-490 Mhz |
| − | * 32 systems / 250 groups (trunked mode) | + | *32 systems / 250 groups (trunked mode) |
| − | * Max 600 channels (trunked mode) | + | *Max 600 channels (trunked mode) |
| − | * Max 250 channels capacity (conventional mode) | + | *Max 250 channels capacity (conventional mode) |
| − | * 12 character dot matririx LCD | + | *12 character dot matririx LCD |
| − | * 10 character alphanumeric alias | + | *10 character alphanumeric alias |
| − | * Wide or narrow bandwidth frequencies | + | *Wide or narrow bandwidth frequencies |
Of the various revisions the two main models: | Of the various revisions the two main models: | ||
| − | * TK-880 is 5W on low power and 25W on high power | + | *TK-880 is 5W on low power and 25W on high power |
| − | * TK-880H is 10W on low power and 45W on high power | + | *TK-880H is 10W on low power and 45W on high power |
| + | == programming == | ||
| + | You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. The KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other. | ||
| + | The TK-880 will program below 450 MHz, but the receive sensitivity is reduced. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum. | ||
Revision as of 17:25, 12 December 2015
This is an FCC Title 47 Part 90 certified transceiver. This is a business band radio that is possible to program for use on 70cm ham radio.
- Band: 450-490 Mhz
- 32 systems / 250 groups (trunked mode)
- Max 600 channels (trunked mode)
- Max 250 channels capacity (conventional mode)
- 12 character dot matririx LCD
- 10 character alphanumeric alias
- Wide or narrow bandwidth frequencies
Of the various revisions the two main models:
- TK-880 is 5W on low power and 25W on high power
- TK-880H is 10W on low power and 45W on high power
programming
You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. The KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other.
The TK-880 will program below 450 MHz, but the receive sensitivity is reduced. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum.
